Feed-Thru

Feed-Thru punches are made from seamless tubing and widely used by felt, leather, and gasket manufacturers. The inside diameter is relieved from the back to give wide inside clearance, allowing scrap to clear smoothly through the base of the punch. The ejection trough the base eliminates stripping, and allows for heavier materials to be cut. Feed-Thru punches can be made in any height to accommodate a multitude of material thicknesses.

Base	Cut Edges			TW	XTW
	1/16’s	1/64’s	1/32’s
			K-200	K-201	K-202
3/16			3/32	7/64	1/8
	K-203	K-204	K-205	K-206	K-207
1/4	1/8	9/64	5/32	11/64	3/16
	K-208	K-209	K-210	K-211	K-212
5/16	3/16	13/64	7/32	15/64	1/4
	K-213	K-214	K-215	K-216	K-217
3/8	1/4	17/64	9/32	19/64	5/16
	K-218	K-219	K-220	K-221	K-222
7/16	5/16	21/64	11/32	23/64	3/8
	K-223	K-224	K-225	K-226	K-227
1/2	3/8	25/64	13/32	27/64	7/16
	K-228	K-229	K-230	K-231	K-232
9/16	7/16	29/64	15/32	31/64	1/2
	K-233	K-234	K-235	K-236
5/8	1/2	33/64	17/32	35/64
	K-237	K-238	K-239	K-240
11/16	9/16	37/64	19/32	39/64
	K-241	K-242	K-243
3/4	5/8	41/64	21/32
	K-244	K-245	K-246
13/16	11/16	45/64	23/32
	K-247	K-248	K-249
7/8	3/4	49/64	25/32
	K-250	K-251	K-252
15/16	13/16	53/64	27/32
	K-253	K-254	K-255
1″	7/8	57/64	29/32
	K-256	K-257	K-258
1-1/16	15/16	61/64	31/32
	K-259	K-260	K-261
1-1/8	1″	1-1/64	1-1/32

Category: Punches

Feed-Thru

OHIO OFFICE

KANSAS OFFICE

SUPPORT