Center Bevel / Inside Bevel / Outside Bevel

Ameriken tube punches never deviate and uniformity is absolute. The consistent quality, sharpness, and long life of the punches allow for faster set-up times and minimal downtime. The standard heights are .918 and .937, but every punch can be made in any height on request. Shreiner Punchout and springs are also available for ejection in all tube punches.

Manufactured from high quality carbon tubing
Case hardened by a vacuum carbonitriding furnace
Wide range of sizes, up to 12”

Base	OB	OB	CB	IB	IB	IB
		K-0				K-00
1/8 *		3/32				7/64
	K-1	K-2	K-3	K-4	K-5	K-6
3/16	7/64	3/32	1/8	9/64	5/32	11/64
	K-7	K-8	K-9	K-10	K-11	K-12
1/4	9/64	5/32	3/16	13/64	7/32	15/64
	K-13	K-14	K-15	K-16	K-17	K-18
5/16	13/64	7/32	1/4	17/64	9/32	19/64
	K-19	K-20	K-21	K-22	K-23	K-24
3/8	17/64	9/32	5/16	21/64	11/32	23/64
	K-25	K-26	K-27	K-28	K-29	K-30
7/16	21/64	11/32	3/8	25/64	13/32	27/64
	K-31	K-32	K-33	K-34	K-35	K-36
1/2	25/64	13/32	7/16	29/64	15/32	31/64
	K-37	K-38	K-39	K-40	K-41	K-42
9/16	29/64	15/32	1/2	33/64	17/32	35/64
	K-43	K-44	K-45	K-46	K-47	K-48
5/8	33/64	17/32	9/16	37/64	19/32	39/64
	K-49	K-50	K-51	K-52	K-53	K-54
11/16	37/64	19/32	5/8	41/64	21/32	43/64
	K-55	K-56	K-57	K-58	K-59	K-60
3/4	41/64	21/32	11/16	45/64	23/32	47/64
	K-61	K-62	K-63	K-64	K-65	K-66
13/16	45/64	23/32	3/4	49/64	25/32	51/64
	K-67	K-68	K-69	K-70	K-71	K-72
7/8	49/64	25/32	13/16	53/64	27/32	55/64
	K-73	K-74	K-75	K-76	K-77	K-78
15/16	53/64	27/32	7/8	57/64	29/32	59/64
	K-79	K-80	K-81	K-82	K-83	K-84
1″	57/64	29/32	15/16	61/64	31/32	63/64
	K-85	K-86	K-87	K-88	K-89	K-90
1-1/16	61/64	31/32	1″	1-1/64	1-1/32	1-3/64
	K-91	K-92	K-93	K-94	K-95	K-96
1-1/8	1-1/64	1-1/32	1-1/16	1-5/64	1-3/32	1-7/64
	K-97	K-98	K-99	K-100	K-101	K-102
1-3/16	1-5/64	1-3/32	1-1/8	1-9/64	1-5/32	1-11/64
	K-103	K-104	K-105	K-106	K-107	K-108
1-1/4	1-9/64	1-5/32	1-3/16	1-13/64	1-7/32	1-15/64
	K-109	K-110	K-111	K-112	K-113	K-114
1-5/16	1-13/64	1-7/32	1-1/4	1-17/64	1-9/32	1-19/64
	K-115	K-116	K-117	K-118	K-119	K-120
1-3/8	1-17/64	1-9/32	1-5/16	1-21/64	1-11/32	1-23/64
	K-121	K-122	K-123	K-124	K-125	K-126
1-7/16	1-21/64	1-11/32	1-3/8	1-25/64	1-13/32	1-27/64
	K-127	K-128	K-129	K-130	K-131	K-132
1-1/2	1-25/64	1-13/32	1-7/16	1-29/64	1-15/32	1-31/64
	K-133	K-134	K-135	K-136	K-137	K-138
1-9/16	1-29/64	1-15/32	1-1/2	1-33/64	1-17/32	1-35/64
	K-139	K-140	K-141	K-142	K-143	K-144
1-5/8	1-33/64	1-17/32	1-9/16	1-37/64	1-19/32	1-39/64
	K-145	K-146	K-147		K-148	K-149
1-11/16	1-37/64	1-19/32	1-5/8		1-21/32	1-43/64
	K-150	K-151	K-152		K-153	K-154
1-3/4	1-41/64	1-21/32	1-11/16		1-23/32	1-47/64

Category: Punches

Center Bevel / Inside Bevel / Outside Bevel

OHIO OFFICE

KANSAS OFFICE

SUPPORT