• Ameriken tube punches never deviate and uniformity is absolute.  The consistent quality, sharpness, and long life of the punches allow for faster set-up times and minimal downtime.  The standard heights are .918 and .937, but every punch can be made in any height on request.  Shreiner Punchout and springs are also available for ejection in all tube punches.
    • Manufactured from high quality carbon tubing
    • Case hardened by a vacuum carbonitriding furnace
    • Wide range of sizes, up to 12”
    Base OB OB CB IB IB IB
    K-0 K-00
      1/8 * 3/32 7/64
    K-1 K-2 K-3 K-4 K-5 K-6
    3/16 7/64 3/32 1/8 9/64 5/32 11/64
    K-7 K-8 K-9 K-10 K-11 K-12
    1/4 9/64 5/32 3/16 13/64 7/32 15/64
    K-13 K-14 K-15 K-16 K-17 K-18
    5/16 13/64 7/32 1/4 17/64 9/32 19/64
    K-19 K-20 K-21 K-22 K-23 K-24
    3/8 17/64 9/32 5/16 21/64 11/32 23/64
    K-25 K-26 K-27 K-28 K-29 K-30
    7/16 21/64 11/32 3/8 25/64 13/32 27/64
    K-31 K-32 K-33 K-34 K-35 K-36
    1/2 25/64 13/32 7/16 29/64 15/32 31/64
    K-37 K-38 K-39 K-40 K-41 K-42
    9/16 29/64 15/32 1/2 33/64 17/32 35/64
    K-43 K-44 K-45 K-46 K-47 K-48
    5/8 33/64 17/32 9/16 37/64 19/32 39/64
    K-49 K-50 K-51 K-52 K-53 K-54
    11/16 37/64 19/32 5/8 41/64 21/32 43/64
    K-55 K-56 K-57 K-58 K-59 K-60
    3/4 41/64 21/32 11/16 45/64 23/32 47/64
    K-61 K-62 K-63 K-64 K-65 K-66
    13/16 45/64 23/32 3/4 49/64 25/32 51/64
    K-67 K-68 K-69 K-70 K-71 K-72
    7/8 49/64 25/32 13/16 53/64 27/32 55/64
    K-73 K-74 K-75 K-76 K-77 K-78
    15/16 53/64 27/32 7/8 57/64 29/32 59/64
    K-79 K-80 K-81 K-82 K-83 K-84
    1" 57/64 29/32 15/16 61/64 31/32 63/64
    K-85 K-86 K-87 K-88 K-89 K-90
    1-1/16 61/64 31/32 1" 1-1/64 1-1/32 1-3/64
    K-91 K-92 K-93 K-94 K-95 K-96
    1-1/8 1-1/64 1-1/32 1-1/16 1-5/64 1-3/32 1-7/64
    K-97 K-98 K-99 K-100 K-101 K-102
    1-3/16 1-5/64 1-3/32 1-1/8 1-9/64 1-5/32 1-11/64
    K-103 K-104 K-105 K-106 K-107 K-108
    1-1/4 1-9/64 1-5/32 1-3/16 1-13/64 1-7/32 1-15/64
    K-109 K-110 K-111 K-112 K-113 K-114
    1-5/16 1-13/64 1-7/32 1-1/4 1-17/64 1-9/32 1-19/64
    K-115 K-116 K-117 K-118 K-119 K-120
    1-3/8 1-17/64 1-9/32 1-5/16 1-21/64 1-11/32 1-23/64
    K-121 K-122 K-123 K-124 K-125 K-126
    1-7/16 1-21/64 1-11/32 1-3/8 1-25/64 1-13/32 1-27/64
    K-127 K-128 K-129 K-130 K-131 K-132
    1-1/2 1-25/64 1-13/32 1-7/16 1-29/64 1-15/32 1-31/64
    K-133 K-134 K-135 K-136 K-137 K-138
    1-9/16 1-29/64 1-15/32 1-1/2 1-33/64 1-17/32 1-35/64
    K-139 K-140 K-141 K-142 K-143 K-144
    1-5/8 1-33/64 1-17/32 1-9/16 1-37/64 1-19/32 1-39/64
    K-145 K-146 K-147 K-148 K-149
    1-11/16 1-37/64 1-19/32 1-5/8 1-21/32 1-43/64
    K-150 K-151 K-152 K-153 K-154
    1-3/4 1-41/64 1-21/32 1-11/16 1-23/32 1-47/64
  • Feed-Thru punches are made from seamless tubing and widely used by felt, leather, and gasket manufacturers.  The inside diameter is relieved from the back to give wide inside clearance, allowing scrap to clear smoothly through the base of the punch.  The ejection trough the base eliminates stripping, and allows for heavier materials to be cut.  Feed-Thru punches can be made in any height to accommodate a multitude of material thicknesses.
    Base Cut Edges TW XTW
    1/16's 1/64's 1/32's
    K-200 K-201 K-202
    3/16 3/32 7/64 1/8
    K-203 K-204 K-205 K-206 K-207
    1/4 1/8 9/64 5/32 11/64 3/16
    K-208 K-209 K-210 K-211 K-212
    5/16 3/16 13/64 7/32 15/64 1/4
    K-213 K-214 K-215 K-216 K-217
    3/8 1/4 17/64 9/32 19/64 5/16
    K-218 K-219 K-220 K-221 K-222
    7/16 5/16 21/64 11/32 23/64 3/8
    K-223 K-224 K-225 K-226 K-227
    1/2 3/8 25/64 13/32 27/64 7/16
    K-228 K-229 K-230 K-231 K-232
    9/16 7/16 29/64 15/32 31/64 1/2
    K-233 K-234 K-235 K-236
    5/8 1/2 33/64 17/32 35/64
    K-237 K-238 K-239 K-240
    11/16 9/16 37/64 19/32 39/64
    K-241 K-242 K-243
    3/4 5/8 41/64 21/32
    K-244 K-245 K-246
    13/16 11/16 45/64 23/32
    K-247 K-248 K-249
    7/8 3/4 49/64 25/32
    K-250 K-251 K-252
    15/16 13/16 53/64 27/32
    K-253 K-254 K-255
    1" 7/8 57/64 29/32
    K-256 K-257 K-258
    1-1/16 15/16 61/64 31/32
    K-259 K-260 K-261
    1-1/8 1" 1-1/64 1-1/32
  • Side outlet punches are manufactured from high carbon tool steel, then vacuum hardened, insuring longer punch life. These punches are available in a variety of specialty shapes, bases, heights, and side holes.  The standard height is .937, but can be made in a variety of other heights upon request.  Side outlet punches are available with knurled bases and pins
    Base Cut Edges
    K# 1/16's 1/32's 1/64's
    1/8 400 1/32
    3/16 401 1/32
    1/8 402 3/64
    3/16 403 3/64
    1/8 404 1/16
    3/16 405 1/16
    1/8 406 5/64
    3/16 407 5/64
    3/16 408 3/32
    1/4 409 3/32
    3/16 410 7/64
    1/4 411 7/64
    412 1/8
    5/16 413 1/8
    1/4 414 9/64
    5/16 415 9/64
    1/4 416 5/32
    5/16 417 5/32
    1/4 418 11/64
    5/16 419 11/64
    420 3/16
    3/8 421 3/16
    5/16 422 13/64
    3/8 423 13/64
    Base Cut Edges
    K# 1/16's 1/32's 1/64's
    5/16 424 7/32
    3/8 425 7/32
    426 15/64
    13/32 427 15/64
    3/8 428 1/4
    13/32 429 1/4
    3/8 430 17/64
    7/16 431 9/32
    3/8 432 9/32
    7/16 433 19/64
    434 5/16
    15/32 435 5/16
    7/16 436 21/64
    1/2 437 21/64
    438 11/32
    9/16 439 11/32
    1/2 440 23/64
    441 3/8
    17/32 442 3/8
    9/16 443 3/8
    5/8 444 3/8
    Base Cut Edges
    K# 1/16's 1/32's 1/64's
    1/2 445 25/64
    9/16 446 25/64
    1/2 447 13/32
    9/16 448 13/32
    5/8 449 13/32
    9/16 450 27/64
    5/8 451 27/64
    9/16 452 7/16
    19/32 453 7/16
    5/8 454 7/16
    19/32 455 29/64
    5/8 456 29/64
    457 15/32
    3/4 458 15/32
    5/8 459 31/64
    460 1/2
    21/32 461 1/2
    3/4 462 1/2
    5/8 463 33/64
    21/32 464 33/64
    11/16 465 17/32
    3/4 466 17/32
    11/16 467 35/64
    Base Cut Edges
    K# 1/16's 1/32's 1/64's
    23/32 468 35/64
    469 9/16
    3/4 470 9/16
    471 37/64
    472 19/32
    473 39/64
    7/8 474 5/8
    1" 475 5/8
    476 11/16
    477 3/4
    Bold denotes Cut Edge on Standard Base.
  • Straight wall punches provide important technical solutions for a wide range of very different diecutting applications. As the name suggests the punch has straight outer walls for use in close quarters where standard punches will not work, and they produce a perfectly clean hole in the material being cut. Using the best quality steel available combined with an innovative vacuum hardening process, these punches have exceptional performance characteristics.

Go to Top