• This reproduction carbon paper is designed specifically for steel rule diemakers and die cutters.  Only the highest quality kraft paper and sensitive wax inks are used to assure you of a clear, sharp, and accurate reproduction.  Typical applications for this product are: pulling or rubbing a strike sheet; die impressions to makeready cutting rule and level creasing rule; die impressions to cut channels in counter board and for locating Matrix; general tracings to transfer layouts to die boards or Mylar and Vinyl strike sheets; creating a top sheet for makeready.  Carbon paper is available in .002” or .005” (kraft backed) thicknesses, standard 24″, 36″, 45″ and 54” widths, and 150’, 300’, or 1,500’ roll lengths.  Various sizes of sheets can be special ordered.
    • Blocks used to align stripping units with the cutting die on Centerline press systems
    • Several sizes/colors available
    • .750 Injection Molded Nylon Pin
    • .833 Machined Delrin Pin
    • .833 Machined Aluminum Pin
    • Square Nylon Bushing
    • Round Styrene Ring
  • Garland Elastomer Mallets are widely used in die-making applications. They are constructed from an advanced resin material for long-lasting durability. Like Garland Rawhide Mallets, the Elastomer Mallets are designed so that they will not mar or scratch the steel rule.
    Size Face Diameter Head Length
    #4 2” 3 ½”
    #5 2 ¾” 4 ¾”
  • Shreiner carries a large assortment of grinding wheels for machines ranging from the Quick Nick grinder to a common household Dremel.  Size availability can vary depending upon the thickness and diameter combination of the wheel.  The most common thicknesses are .006, .008, .010, .012, .014, .015, .016, .020, .025, .031, .032, .047, and .062.  The most common diameters are 1-1/2, 1-5/8, 2, and 2-1/4.
  • For those that prefer the traditional, or “old school” style of make-ready tape there is the option for the paper lick and stick.  As the name implies, this tape must be moistened to activate the adhesive prior to patching.  Lick and Stick is available in .0015”, .003”, and .006” thicknesses, and 1/4” and 1/2” widths.  This product is cost effective and durable.
    Thickness Width Length per Roll
    .0015 1/4”, 1/2” 500’
    .003 1/4”, 1/2” 225’
    .006 1/4”, 1/2” 140’
  • Bar-Plate Low Profile Adjusto Guides are the answer to print-to-cut registration and faster make-ready on your platen press. The guides are available in two sizes, full 2" x 2", and half 1" x 2".  The guides can be easily adhered to your cutting surface with double-coated tape, and the front surface lip allows for plenty of over-hang to keep the sheet from rising. Once the guides have been placed in the chosen positions, registration can be easily accomplished by loosening and tightening the Allen screw with the provided tool. The vernier scale located on both sides of the guides makes precise adjustment easy to accomplish, and the low height of only .180" makes recessing the die board unnecessary. Both sizes of the Adjusto Guides, the adjusting tool, and the double-coated tape are available on an individual basis, or can be purchased as a complete set of three guides, the Allen tool, and the double-sided tape.
  • The use of Mylar as a makeready sheet has steadily increased in popularity in the die cutting and diemaking industries. Precise thicknesses and various roll widths give the greatest degree of flexibility possible. The matting on one side and polish on the other side provide great flexibility.  Mylar is the best product for use on a plotter or for a carbon transfer, with die rub-offs coming out perfectly every time.
  • The key to proper nicking is to always nick perpendicular to the cutting edge of the knife. While our Quicknick Grinder is the perfect solution, it is not always the answer for everyone. A cost-effective alternative to grinding that can fit into anyone’s budget—the Nicking Chisel Set. The Nicking Chisel Set is a simple, inexpensive tool for nicking both flat and rotary dies. The set comes complete with a knurled holder and three standard tips, .020", .030" & .040". The male-threaded tips and the female-threaded holder make changing tips quick and simple.  The Nicking Chisel Set eliminates the need to use screwdrivers, cold chisels, files or other pieces of knife. The tips give a clean, precise, and when held vertically, a perpendicular nick. Also ideal for enlarging an existing nick, the Nicking Chisel Set is a must in every professional diemaker and diecutter’s tool box.
  • Pink Glue is an excellent adhesive for bonding die board that has been routed. This adhesive is quickly and easily applied with brush or roller, and offers a built-in wet tack that helps prevent board movement during clamping. Available in 1 gallon or 5 gallon containers.

Go to Top